The construction of steel mesh is not very complex, but there are many details to be paid attention to during the construction. Once some important parts are ignored, the consequences are very serious. Therefore, we should know more about the technical requirements in the construction process before the construction of steel mesh.

　　大家都知道鋼筋網片是一種新型建筑用墻體材料，替代磚做承重墻等設備，當然也建筑鋼筋一起加固墻體，在美觀的同時保證了工程質量。采用Q235低碳鋼絲、不銹鋼絲焊接而成，它可替代磚墻做各種承重墻，非承重墻，陽臺等是一種新型建筑用墻體材料。替代磚做承重墻更加結實。

　　As we all know, reinforced mesh is a new type of wall material for building, which can replace brick as load-bearing wall and other equipment. Of course, it can also reinforce the wall together with building reinforcement, ensuring the engineering quality while being beautiful. It is welded with high quality Q235 low carbon steel wire and stainless steel wire. It can replace brick wall to make all kinds of load-bearing wall, non load-bearing wall, balcony and so on. Replace brick to make bearing wall stronger.

　　鋼筋網片只要檢查焊接部位，用的低碳鋼絲進行制作，沒有太大的技術要求，網孔設計均勻，網面平整，根據需求也可以噴涂各種顏色。

　　As long as the welded parts of the reinforcement mesh are inspected and made of high-quality low-carbon steel wire, there is no too large technical requirements. The mesh design is uniform and the mesh surface is flat. According to the requirements, various colors can also be sprayed.

　　我國企業目前生產建筑用熱軋帶肋鋼筋主要依據我國標準GB1499-1998,也有部分生產根據特殊需要、按國外同類產品的標準為依據組織生產，例如采用英標BS4449:1988生產BSG460等。

　　At present, the production of hot-rolled ribbed steel bars for construction by Chinese enterprises is mainly based on the Chinese standard GB1499-1998, and some production is organized according to the special needs and the standards of similar foreign products, for example, BSG460 is produced by adopting the British standard bs4449:1988.

　　在建筑鋼筋力學性能方面氮含量應不大于0.012%.鋼中如有足夠數量的氮結合元素，含氮量的限制可適當放寬。其實除了上面的內容之外，關于鋼筋網片施工技術的要求還有非常的多內容需要大家去掌握。

　　In terms of mechanical properties of building reinforcement, the nitrogen content shall not be more than 0.012%. If there are enough nitrogen binding elements in steel, the limit of nitrogen content can be appropriately relaxed. In fact, in addition to the above content, there are a lot of requirements on the construction technology of steel mesh that we need to master.

　　本文由http://www.h2690.com/發布

　　This article is published by http://www.h2690.com/